JENEsys Edge^® 414

Niagara 4 Programmable Logic Controller

The JENEsys Edge^® 414 is a Niagara 4, IP Programmable Controller and is ideal for terminal equipment control that requires minimal integration with third-party products (max three) and minimal points of control (max 50). It runs the full Niagara stack and is a fully programmable Niagara field and equipment controller with 14 IO (inputs and outputs) on-board.

The controller blends the adaptability and flexibility of a freely IP programmable device. Built on Lynxspring’s extensible Onyxx^® IP hardware platform and Niagara 4 with a 50-point 3-device license, the JENEsys Edge 414 enables users to utilize Niagara ProBuilder/Workbench software, Niagara programming tools, and the Fox Protocol for easy setup, programming, commissioning, and control.

Each JENEsys Edge 414 includes perpetual Niagara software maintenance. Three (3) extender modules (Onyxx XM 34IO) can be added to the unit. A maximum of 50 IO points may be used. When Onyxx XM hardware is limited to 3 you can individually achieve a maximum possible of 28 AOs, 50 of 54 UIs or 34 DOs.

The JENEsys Edge 414 allows users to maximize their investment in Niagara and make use of a single layer/one platform, IP architecture across the entire building for real-time access and control. Users experience faster deployment times, reduced setup and management costs, reduced complexity, and the ability to add their own value-added applications.

Built on Niagara 4 and Onyxx^® (an extensible platform), the JENEsys Edge 414 runs Niagara 4 on the edge and is compatible with many existing Niagara 4 drivers, including the Niagara 4 Network (FOX), BACnet, Modbus, Web and oBIX. The JENEsys Edge 414 leverages global capacity licensing and runs on a real-time Linux OS with a fast processor and increased memory capacity. The JENEsys Edge 414 also includes a GUI for building your own internal graphics.

Note:   Add to a JENE-EG414, up to 3 additional extender modules (at 34 points of IO each).

Note:    Global Capacity points and devices are limited by license (50) and devices (3). The Onyxx driver is limited by points only.

Features

• Linux OS
• Made in the USA
• Full Niagara 4 Stack
• Compact Footprint
• Energy Efficient
• Includes the Following Tools with Reporting:
  • Configuration
  • Auto IP Addressing
  • Remediation/Patching
  • Continuous Commissioning
• Report Results through Niagara
• Lower Maintenance Requirements as Compared to Other Systems

Ancillary Parts

• Wall and Duct Sensors
• Conference Room Communicating Stats

JENEsys Edge 414 Specifications

• Fully Programmable in Niagara
• Open NiCS
• Uses Standard Niagara 4 drivers.
• Web Browser HMI Included
• Capable of Stand-Alone Operation
• Compatible with BACnet IP & BACnet MS/TP, Modbus TCP & RTU Networks
• Field configurable and programmable using a Web Browser or ProBuilder/Workbench
• Uses the Niagara Fox IP Protocol Supporting up to 25 Controllers on a Single Spanning Tree IP Protocol Network
• 14 Total Inputs/Outputs On-Board:
  • 4 Digital Outputs
  • 4 Analog Outputs
  • 6 Universal Inputs
• Standard RS-485 Multi-Drop Communication Bus
• 4G eMMC Flash Memory
• 1GHz AM335x ARM Cortex A8 Processor
• 35 mm DIN Rail or Flat Panel Mounting.

Typical Users of the JENEsys Edge 414

The unit is ideal for today’s small to mid-sized facilities, multi-site environments, plant, and equipment control such as air handling units, roof top units, boilers, fan coil units, heat pumps and more and machine-to-machine applications. This powerful unit meets today’s requirements to connect, manage and control closer to where the data actually is whether it be equipment, a single facility, or a multi-site environment. The versatility, functionality, and broad footprint of the JENEsys Edge 414 using the industry’s most widely deployed platform makes this a powerful, cost-effective, and economical solution. The JENEsys Edge 414 can easily be integrated into other Niagara 4 solutions. It is perfect for both retrofit and new construction projects, small to mid-sized equipment, and applications in commercial, retail, hotels, schools, churches, and health care clinics.

Business Use Cases the JENEsys Edge 414 Resolves

The JENEsys Edge 414 enables you to access data from different sources, make it consistent across multiple applications, have more capacity, offer higher levels of data processing and increased storage capabilities, and add a level of command and control. In addition, connect a JENE-EG414 to up to 3 additional extender modules (Onyxx XM34IO), adding 34 points of IO each, for a maximum of 136 points. The JENEsys Edge 414 licensing is well-suited to take Niagara 4 into smaller or mid-sized and price-sensitive applications.

How the JENEsys Edge 414 Compares to the JENEsys Edge 534

The JENEsys Edge 414 has the same general capabilities, same processor, and memory as the JENEsys Edge 534, but with fewer built-in IOs (14 vs 34) and a smaller form factor. The JENEsys Edge 534 offers multiple license capacities while the EDGE 414 is limited to 50 points and 3 devices and cannot be upgraded.

How the JENEsys Edge 414 Compares to the JENEsys Edge 514

The JENEsys Edge 414 has the same general capabilities, same processor, and memory as the JENEsys Edge 514, including the same built-in IOs (14) and the smaller form factor. However, the JENEsys Edge 514 offers multiple license capacities while the JENEsys Edge 414 is limited to 50 points and 3 devices and cannot be upgraded.